ITA

Resin cement floor

by Atriafloor

Simple as water,

hard as rock

Atriafloor® system’s resin meets concrete and Beauty explodes:

presenting One True Cement, a monolithic floor full of nuances and details,

with a modern and strong character.

 

Industrial design for urban contexts, with a perfect colour range,

to live in contemporary settings, where surfaces form conceptual containers.

 

ATRIAFLOOR ONE

SYSTEM

ATRIAFLOOR

PRIMER / CONSOLIDANTE

ATRIAFLOOR

RASANTE ONE

ATRIAFLOOR

RESINA ONE

ATRIAFLOOR PROTETTIVO

SHINY or MATTE

ATRIAFLOOR

CERA

Resina One by Atriafloor is a single component, water based cementitious resin, based on True Cement™ technology.

Thick, with a monolithic cementitious, trowelled, marbled appearance.

ATRIAFLOOR ONE

APPLICATION

 

PREPARATION OF THE SUBSTRATE

 

Before applying the Resina One resin, you should adequately prepare the substrate to be treated by applying Atriafloor Primer (on tiles or ceramic) or Atriafloor Consolidante consolidating product (on cement and marble) applying the recommended amount (120 g/m²), with a short-bristle roller. After drying, apply two coats of Atriafloor Rasante One top coat, depending on the degree of substrate unevenness, using the recommended quantity (1 kg/m² per coat).

 

APPLICATION OF RESINA ONE

 

After preparing the substrate, apply the first coat of Resina One (about 500 g/m²) using a steel trowel. After drying (2 or 3 hours, depending on temperature), apply the second coat of the product (500 g/m²) smoothing the substrate with short trowel passes (right/left) to make it look even.

 

 

NOTE: To get a more contrasted final effect, it is advisable to spread the second coat more. In addition, to further accentuate the True Cement effect, for the first coat of Resina One you can use a darker shade than that of the final coat you have chosen, as in the examples shown below.

1st coat TRUE021

2nd coat TRUE020

1st coat  TRUE003

2nd coat  TRUE020

1st coat  TRUE021

2nd coat  TRUE027

1st coat  TRUE012

2nd coat  TRUE032

 

PREPARATION OF THE SUBSTRATE

ATRIAFLOOR PRIMER

 

Application (on tiles or ceramic) 120 g/m²

 

PREPARATION OF THE SUBSTRATE

ATRIAFLOOR CONSOLIDATE

 

Application (for cementitious mortar or marble) 120 g/m²

PREPARATION OF THE SUBSTRATE

ATRIAFLOOR RASANTE ONE

 

2 coats (1 Kg/m² per coat) depending on substrate unevenness

RESIN COATING

ATRIAFLOOR RESINA ONE

 

2 coats (500 g/m² per coat)

PROTECTION

ATRIAFLOOR PROTETTIVO TRASPARENTE SHINY/MATTE

 

180 g/m² in 2 coats

UPKEEP

ATRIAFLOOR CERA

 

30 g/m²

Data sheet

TRUE CEMENT™  Colors

is a special selection of colours for Atria products that use the True Cement™ technology - the original mix of cement, size graded aggregates and special additives - designed by Atria for modern, industrial-design décor for indoor and outdoor urban settings.

AVAILABLE COLOURS:

True Cement™ selection by Atria

Upon request RAL® and NCS® - restrictions apply only to mineral tint - oxides

 

 

FINISHING: Shiny or matte with Atriafloor Protettivo protective coating

Trowel application

Ideal for any internal or external horizontal* surface.

Packages available: 5 kg - 20 kg

 

 

*For vertical surfaces it is advisable to use Nicole of the DIVA system by Atriathermika - the revolutionary True Cement™ thermal barrier coating that in addition to decorating insulates the wall it is applied on, offers Atria’s Wellness-Care Technology guarantee, providing well-being you can really feel and a certified energy savings of 20%.

TRUE001

TRUE004

TRUE007

TRUE002

TRUE005

TRUE008

TRUE003

TRUE006

TRUE009

TRUE019

TRUE022

TRUE025

TRUE020

TRUE023

TRUE026

TRUE021

TRUE024

TRUE027

TRUE010

TRUE013

TRUE016

TRUE011

TRUE014

TRUE017

TRUE012

TRUE015

TRUE018

TRUE028

TRUE031

TRUE034

TRUE029

TRUE032

TRUE035

TRUE030

TRUE033

TRUE036

The colours shown in this brochure are for guidance purposes only and shall not constitute an absolute reference.